A vibrating plate compactor is a heavy piece of equipment that can be used for many different jobs. It can compact, vibrate and level material for numerous applications, such as driveways, car parks or roadworks. 

However, it does have some limitations which must be considered when using one. When operating a machine like this, it’s important to follow the manufacturer’s instructions carefully. 

Below are some tips on how you can keep your vibrating Best plate compactors working effectively:

IMG_0256-2

Always jack the vibrating plate compactor up to a height appropriate 

The jack must be raised to a height appropriate for the work area. The jack must be level with the ground, or as close as possible to it without causing instability in the compactor’s base. Do not overload your plate compactor!

Ensure the moisture is present in the material before starting

If you are compacting over concrete, ensure there is moisture present in the material before starting. This will result in less vibration and better performance. If you are compressing soil or sand, ensure that it has been rammed down firmly and is as level as possible before using your vibrating plate compactor on top of it. Always check for any loose objects underneath your machine before operating it on any surface (including concrete).

Make sure the correct type of plates is being used for the job

The type of plate you use for your plate compactors will depend on the job. For example, if you’re using the vibrating plate compactor to compact soil that needs to be packed down, it’s best to use a heavy-duty plate with a rectangular shape and an open top. This type of plate can withstand more pressure than other types, making it ideal for this particular application.

However, if you’re using your machine for other purposes such as compacting concrete or asphalt, then there are different considerations for choosing an appropriate plate.

Use slow ramps up and down

Slow ramps up and down, this prevents damage to the machine, helps reduce compaction time and prevents overloading. Slowly raise the compactor to its full height before starting a cycle. Slowly, lower the vibrating plate compactor onto your material.

Ensure that plates are not used at an angle

An angle greater than 30 degrees will result in poor compaction results.

  • Ensure that plates are level and not too close together. This will result in a high percentage of voids between the compacted layers, which can cause the material to settle laterally or slump when wetted and dried repeatedly over time (i.e., during construction).
  • Ensure that plates are not too far apart; if they are spaced too far apart, then this may cause slumping as well as reduced compaction due to less contact with soil particles being compacted by each stroke of your vibrating plate compactor machine’s piston(s).

Final Words 

The vibrating plate compactor is a wonderful piece of equipment that can save you time and money. However, if not properly maintained and operated, it can cause problems for both you and your business. By following these tips, you will be able to keep your plate compactors working more effectively so that they will last for many years to come!

Source by :-  5 Tips to Maintain the Vibrating Plate Compactor