How To Make Repairs to Your Windsurf Board do you know?

Windsurfing is a great way to spend a summer day. Unlike other sports like swimming, things can go wrong with your equipment. If you hop on your windsurf board and something feels off, there’s a good chance you need to make a few repairs.

The only problem is you aren’t sure what needs fixing. Don’t worry; we’ve got you covered.

Check out this helpful guide that goes into detail about how to repair a damaged windsurf board.

Assess the Damage

Assessing the damage is an important part of making repairs to your windsurf sailboard. Begin by examining the board for dents, chips, cracked parts, and signs of delamination.

Pay special attention to any force points where your board might have been bent by pressure from the downhaul, harness lines, heavy effects, and more. If you need to make repairs to your windsurf board, you should visit a windsurfing store.

Patch

It is best to start with the patch, which is a pre-cut polyester or polypropylene sheet. Make sure the patch is larger than the tear. Next, sand the area around the tear, removing any dirt or contaminants. Remove any loose material from the area with a razor blade before applying the patch to the surface of the board.

Reshape

To reshape your board, start by cleansing the board to remove any debris or dirt. Then, use a hand-held router to make marks on the board that shows where cuts need to be made. Next, using a jigsaw or circular saw, cut through the marked area and remove any excess material. Cut away the damaged portion of the board.

Let the resin dry and sand down the entire board until it is smooth, if necessary. Paint or seal the board and inspect your work to ensure a successful repair.

Re-Glass

Re-Glass kits come with the materials and tools to carry out most repairs. Start by washing the board with a mild cleaner. Once the board is clean and dry, use a grinder to remove any blisters and old gel coats that may be on the board. Once the area is clean, use a putty knife to apply the Re-Glass epoxy evenly over the damaged area of the board.

Re-Glass is the best way to make quick, easy, and lasting repairs to your dinged windsurf board.

Repaint

Making repairs to your windsurf board can include repainting it. You will need to clean and sand the area of the board where you will be repainting. Removal of all previous paint is paramount, as well as any dirt and debris that may be present.

Once you have gained and mixed the fresh paint, use a low nap roller to apply the paint. Apply a minimum of 2 coats of paint. With proper care and maintenance, your windsurf board will last for many years.

Knowing How to Repair Your Windsurf Board

Making repairs to your windsurf board is a skill that can be accomplished by following these simple steps. Besides the preparation, professional help is also available. By taking preventive steps and knowing when to seek professional help, you can keep your windsurf board in great condition. Start today by gathering the right materials and the right skills, and have fun in the water!

Want more tips or advice for keeping up your board? Check out some of the other articles on our website.