With most trends in interior design, there comes a point where the trend has peaked and it’s time to move on to the next big thing – but peel and stick backsplash tiles? Not so much! When people are redesigning their kitchens and bathrooms, they’re keeping sticky backsplash tiles as an option because of their appeal and convenience.

Introduction

Peel and stick vinyl tile and peel and stick composite tiles, for their high gloss 3d appearance and easy installation, become backsplash trends. Below are some guide things you need to know when buying peel and stick backsplash tiles. Unlike the old school tiling process, installing a sticky backsplash is like setting up an adhesive wall paper. The only difference is that once it's on the wall, you can't remove it without damaging the surface underneath it.

Guide Things To Know When Buying Peel And Stick Backsplash Tile

Stick backsplash tiles come with a few guidelines to help you choose the right tile.

First, make sure that the sticky backsplash tile has a non-adhesive film on both sides of the tile so they won't leave any residue behind.

Second, make sure that there is no discoloration or bubbling in the adhesive - anything that could be a sign of an old installation or improper storage conditions.

Lastly, look for peel and stick backsplash tiles that have been UV coated because this will protect your investment against fading. With these three guidelines, you'll have your perfect sticky backsplash tile in no time!

10 Things You Need To Know Before Using Peel And Stick Tile

Sticky tile is new and many people don't know how to use them. But, it's not too hard to figure out.

 1) If you're installing a backsplash that is peel and stick, make sure to measure the wall where you want the backsplash installed before purchasing the tiles. That way you will know if you have enough tiles before buying them.

 2) Make sure you clean the surface of your walls with soap and water prior to installation.

 3) To install sticky tiles, spread some thin-set mortar over the back of the adhesive strip on one side of each tile, then press firmly into place. Wait 24 hours before grouting or wiping down with water to clean off any remaining mortar residue.

 4) Peel and stick tiles are great because they come pre-cut so there's no need for measurements or cutting.

The two best options on the market

Are you thinking about installing a backsplash in your kitchen, but are worried about the time-consuming installation process? Fortunately, this is where peel and stick backsplash tiles come into play.

They provide an easy way to decorate your kitchen while only taking a few minutes to install. With these tiles, all you have to do is peel off the backing and then stick them on the wall. You can get these tiles that simulate high gloss 3D surfaces or you can go with something simple.

Durability

Sticky backsplash tiles make the process of installing tile much easier but it also means that you need to be a little more careful with installation, as once you stick them down, there is no going back.

Make sure to use a level and wear protective gear when working with any type of construction adhesive. The sticky surface is also slightly more difficult to clean than traditional grout.

Which type of adhesive is best for your project?

Even though both come with their own pros and cons, composite tiles will likely stand up to abuse better than vinyl. So if you have a high-traffic area or rough family (not the kids), composite might be the best choice.

However, if you're looking for a more budget-friendly option that still looks good and is easier to install, vinyl may be your best bet. Check out some of our favorite peel and stick backsplash tiles here