A heat pump is an essential part of keeping your home comfortable all year round, but it can be a bit of a mystery when it comes to upkeep. Luckily, we’re here to help. Keep reading for our top tips on how to clean your heat pump.
What are heat pumps?
A heat pump is a device that uses energy to move heat from one place to another. They are often used in climates where the temperature varies widely, as they can both heat and cool a building. A heat pump tune up is a service that is performed on these devices to ensure that they are working correctly and efficiently. The technician will check the system for leaks, clean the coils, and adjust the settings. They may also replace any worn parts or filters. A tune up can help to improve the performance of your heat pump and ensure that it lasts longer.
How do you prepare for heat pump cleaning?
Cleaning your heat pump is an essential maintenance task that can help it run more efficiently and improve its lifespan. Before you start, disconnect the power supply to the unit. You'll also need a screwdriver, vacuum cleaner, and soft brush or rag. To clean the outdoor unit, begin by removing any debris with a screwdriver or vacuum cleaner. Next, use a soft brush or rag to wipe down the fins and coils. Finally, reattach the cover and reconnect the power supply.
To clean the indoor unit, disconnect it from the power supply. Then use a vacuum cleaner to remove any dust or debris inside the unit.
The best way to clean it is with a vacuum cleaner specially designed for this purpose. The vacuum cleaner should have a long hose to reach all unit parts. It is also essential to use a brush attachment to dislodge any dirt or dust that may be trapped in tight spaces.
Removing the front cover of the unit will give you access to the filter and blower. This is an excellent opportunity to clean both of them. The filter can be removed by pulling it out from the side. It's a good idea to clean it every month or so, especially if you have pets. The blower can be cleaned with a brush or vacuum cleaner. Finally, reconnect the power supply and reattach the cover.
How do you flush out the drain line?
The drain line is the part of the heat pump that removes condensation from the system. This condensation can come from the air handler, where it is produced as a result of running the AC or heating, or it can come from inside the compressor, where it is created as a result of compressing refrigerant. The water drained from the drain line should be clear and free of debris. If you notice that your drain line is clogged, you will need to clean it out.
To clean your drain line, start by shutting off power to the heat pump at the breaker box. Next, locate the drain line on either side of the air handler. The easiest way to do this is to look for PVC piping that runs between two metal pipes. Once you have found it, disconnect one end of the PVC pipe and remove any debris that may be blocking its path. Be sure to wear gloves and safety glasses when doing this, as there may be sharp objects in the debris. Once you have cleared out any obstructions, reconnect the PVC pipe and turn on the power to the heat pump.
Overall, cleaning your heat pump is an important task that should not be ignored. By taking the time to clean your heat pump, you can help ensure that it continues to function correctly and that you get the most out of your investment.