
If your video call drops when the power goes out, turn off Wi-Fi on your phone and open the meeting link using cellular data. If the connection is weak, turn off your camera and stay on audio. If the invitation includes a dial-in number, you can try joining by phone instead.
For your next important meeting, set up two backups: battery power for the equipment that connects your home to the internet, and a second way to get online if your home internet service goes down. A charged laptop helps you keep working. A tested hotspot and a colleague who can take over the presentation help keep the meeting moving.

What to Do If the Power Goes Out Mid-Meeting
Rejoin on Your Phone Using Cellular Data
Turn off Wi-Fi on your phone. This forces it to use cellular data instead of trying to connect through your home network.
Open the meeting link from your calendar or invitation. If the call stutters or freezes, turn off your camera and try audio only.
Try dialing in if the invitation provides a number. Look for the meeting ID and any passcode the platform requires. Dial-in availability depends on the meeting settings.
If you’re back in the meeting on your phone, stay there while you get your bearings. Set up your laptop on a hotspot if you need to share your screen or work in a document. When you switch devices, mute or disconnect audio on one of them to avoid echo.
If you only need to listen or answer questions, staying on your phone may be the simplest way to finish the call. Put it somewhere you get a stable signal and let the group know you’re back on audio. If you need to show a spreadsheet, run a demo, or share slides, ask someone to cover the next agenda item while you connect your laptop to the hotspot. Check that the laptop can load a page before you move the call over. Keep the phone connection available until you’ve confirmed that your laptop audio works.
Ask a Co-Host to Take Over
If you’re presenting, send a quick message to the person who can keep the meeting going:
I lost power and am rejoining by phone. Could you keep the meeting going and share the slides?
For a meeting you’re hosting, give a colleague the role and files they’ll need ahead of time. Check whether they can start the meeting if you’re disconnected before it begins and whether they can share their screen if you drop out midway through. Those permissions can differ. In Zoom, for example, an eligible alternative host can be designated when you schedule the meeting. Give your backup presenter a copy of the deck they can open without access to your computer.
Agree on a handoff before the meeting. If you drop out before it starts, the designated backup should know how to open the session, admit attendees if required, and tell the group how you’ll rejoin. If you drop out during the meeting, they can pick up at the next slide or move to an agenda item they’re ready to lead. For a client call, give your backup the current deck and the name of the next speaker. Open the file together once so you can catch any access restrictions before the call.
Why Your Call Can Drop While Your Laptop Is Still On
Check Your Modem and Router
Your laptop can switch to its own battery while the equipment that connects it to the internet shuts off. Check what’s actually installed in your home. Cable internet may use a separate modem and router or a single gateway. Fiber service may use a separately powered optical network terminal (ONT) that connects to your router.
If you’re setting up backup power, follow the connection from your internet service equipment to your laptop. Powering the router alone leaves a gap if the modem or ONT also needs power. If your office relies on a mesh node or a network switch, check whether you can connect directly to the main router during an outage or whether that extra device also needs backup power.
Start with the status lights. If a device that normally shows lights goes dark as soon as the power cuts, check whether its power adapter is connected to a battery-backed output and whether that output is enabled. If the device starts up again, give it time to reconnect. Your laptop may reconnect to Wi-Fi before the modem or ONT finishes establishing its internet connection.
Switch Networks If Your Internet Service Is Down
Your phone or laptop may show a Wi-Fi connection even when the router has lost internet service. If the modem or ONT and router are powered but several websites still won’t load, switch to cellular data or a hotspot. Your internet provider’s equipment outside your home may also be affected by the outage.
If other sites load but the meeting won’t open, try the invitation link again and check whether the meeting platform is having an outage. If cellular service is weak, try audio only or dial in if the invitation supports it. If neither works, send a short text to your backup presenter or a teammate so they know to continue without waiting for you.
Once the devices are powered, try loading two unrelated websites from a device on your home Wi-Fi. If neither loads, switch that device to cellular or a hotspot and try again. If the websites work on cellular but fail on home Wi-Fi, use cellular for the meeting and check your provider’s outage information later. If websites load normally but the meeting link fails, check the invitation, your sign-in, and the platform’s status.

Build a Backup Setup for Your Next Video Call
Start With a Charged Laptop and a Tested Phone Hotspot
Charge your laptop and phone before a call you can’t afford to miss. Check that your mobile plan supports hotspot use and connect your laptop to it at least once from the room where you work. Joining on your phone and sharing slides from a laptop tethered to that phone are different tasks. Test the one you’ll actually need.
Save the meeting link and any dial-in details somewhere you can open on your phone. Download a local copy of your slides, and give your backup presenter a copy in advance. If you plan to demo a web app, keep a few screenshots handy so someone can walk through the main points if the live demo becomes unavailable. Keep a phone charger or power bank nearby if you expect to tether for an extended period.
Back Up Your Home Internet Equipment
Start with the modem or ONT and the router. Add your laptop charger if you expect to work beyond the laptop’s own battery life. A monitor, lamp, or other desk equipment can go on a separate list so you can see how much extra energy each would use.
Measure the combined draw during a typical call if you have a compatible plug-in power meter. A charger’s nameplate is useful for checking its rated load, but the laptop may draw less during normal use. Then decide whether you need enough energy to finish a meeting or enough to stay online for several hours.
Backup scenario | Assumed average load | Target time | Estimated energy at the devices |
Finish a call with the laptop on its own battery | 20 W for the modem or ONT and router | 1 hour | 20 Wh |
Keep the network and laptop powered through part of the workday | 20 W for the network equipment plus 45 W for the laptop | 4 hours | 260 Wh |
These are planning assumptions, not test results. The estimates use average watts × hours. If you assume 80% of a station’s nominal capacity is available to the connected equipment, the four-hour example calls for about 325 Wh of nominal capacity before adding a reserve. That 80% figure is illustrative. Actual usable energy depends on the station, the outputs you use, the load, and the station’s own power consumption. At low loads, keeping an AC inverter on can account for a meaningful share of the energy used.
For a short interruption with only networking equipment to support, a small UPS may meet your needs. If you want to keep the network and laptop running through a longer outage, compare a Jackery solar generator setup by battery capacity, output, and how it switches to battery power. The Jackery Explorer 1000 v2 is one option if you want more storage than the four-hour example calls for. Jackery lists 1,070 Wh of nominal capacity, 1,500 W of rated AC output, and a switch to battery power within 20 milliseconds in its documented UPS setup.
That transfer time describes the power station. Whether your modem, ONT, or router stays online through the switch depends on your equipment, so test the full setup before relying on it. Check the selected kit if you want solar panels for recharging. For an outage that starts mid-call, the energy already in the battery is what you can count on immediately.
The one-hour example assumes the laptop starts with enough charge to finish the call. If it does, leaving its charger unplugged preserves battery power for the network gear. For a longer session, measure with the laptop charger connected and the laptop doing its usual work. Video, screen sharing, and charging a nearly empty laptop can change the draw. Check your laptop’s battery level before deciding which scenario matches your workday.
Set a reserve according to what would happen if the outage lasted longer than planned. In the four-hour example, budgeting for an extra hour at the same assumed 65 W adds 65 Wh at the devices. That brings the total to 325 Wh at the devices, or about 406 Wh of nominal capacity at the same illustrative 80% usable fraction. Recalculate if you add a display or another powered device. Check the station’s output rating separately against the equipment you expect to run together.
Test Your Backup Before an Important Meeting
Run a Practice Call on Backup Power
Start a test call with a colleague while your network equipment is connected to the backup unit in the configuration specified by its manual. Follow the manufacturer’s instructions to simulate loss of wall power. Watch the modem or ONT and router status lights, and ask your colleague whether your audio or video froze.
Record which devices stayed on, whether the call dropped, and how long it took to rejoin if it did. If the network equipment rebooted, check that each essential device was connected to the backup output and confirm the station was set up as directed. Repeat the test after correcting the setup. The result to look for is whether your particular equipment stays connected through the transfer.
Before the test, note the battery charge, the devices connected, and the average load if you can measure it. Ask your colleague to keep talking during the transfer so you can hear any gap, and ask them to note what they see on their end. Afterward, write down whether the network gear rebooted, whether either person lost audio or video, and how long recovery took. If you change the router, station, or outlet configuration, repeat the test with the new setup. Keep the notes beside your backup instructions so you know what to expect. If the call stays connected, repeat the test with screen sharing active so you can see how the setup handles the work you actually do.
Practice Rejoining Without Home Wi-Fi
Simulate losing home internet by turning off Wi-Fi on your phone and rejoining over cellular data. Then try connecting your laptop to the phone’s hotspot and sharing a slide. If your colleague is the designated backup presenter, have them open the deck and share it while you disconnect.
Before the real meeting, confirm three things: your phone can join, your slides open offline, and someone else can take over.
For a separate rehearsal, turn off Wi-Fi on the laptop too before reconnecting it to the phone’s hotspot. Time how long it takes to find the link and get back into the meeting. Try sharing a slide and ask your colleague whether they can hear you clearly while you present. If the connection struggles, repeat with the camera off. Then have the backup presenter take over from their own copy of the file. Record which option worked in your workspace and keep the meeting link, dial-in details, and your teammate’s contact information together.